background image

 

Chapter 1.  Product warranty and notices

 57

Power cords

For your safety, IBM provides a power cord with a grounded attachment plug to use 
with this IBM product. To avoid electrical shock, always use the power cord and plug 
with a properly grounded outlet.

IBM power cords used in the United States and Canada are listed by Underwriter’s 
Laboratories (UL) and certified by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord 
set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a 
maximum of 15 feet in length and a parallel blade, grounding-type attachment plug 
rated 15 amperes, 125 volts. 

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-
certified cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor 
cord, a maximum of 15 feet in length and a tandem blade, grounding-type attachment 
plug rated 15 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a 
grounding-type attachment plug. The cord set should have the appropriate safety 
approvals for the country in which the equipment will be installed.

IBM power cords for a specific country or region are usually available only in that 
country or region.

IBM power cord part 

number

Used in these countries and regions

13F9940

Argentina, Australia, China (PRC), New Zealand, Papua New 
Guinea, Paraguay, Uruguay, Western Samoa 

13F9979

Afghanistan, Algeria, Andorra, Angola, Austria, Belgium, Benin, 
Bulgaria, Burkina Faso, Burundi, Cameroon, Central African Rep., 
Chad, China (Macau S.A.R.), Czech Republic, Egypt, Finland, 
France, French Guiana, Germany, Greece, Guinea, Hungary, 
Iceland, Indonesia, Iran, Ivory Coast, Jordan, Lebanon, 
Luxembourg, Malagasy, Mali, Martinique, Mauritania, Mauritius, 
Monaco, Morocco, Mozambique, Netherlands, New Caledonia, 
Niger, Norway, Poland, Portugal, Romania, Senegal, Slovakia, 
Spain, Sudan, Sweden, Syria, Togo, Tunisia, Turkey, former USSR, 
Vietnam, former Yugoslavia, Zaire, Zimbabwe

13F9997

Denmark

14F0015

Bangladesh, Burma, Pakistan, South Africa, Sri Lanka

14F0033

Antigua, Bahrain, Brunei, Channel Islands, China (Hong Kong 
S.A.R.), Cyprus, Dubai, Fiji, Ghana, India, Iraq, Ireland, Kenya, 
Kuwait, Malawi, Malaysia, Malta, Nepal, Nigeria, Polynesia, Qatar, 
Sierra Leone, Singapore, Tanzania, Uganda, United Kingdom, 
Yemen, Zambia

14F0051

Liechtenstein, Switzerland

14F0069

Chile, Ethiopia, Italy, Libya, Somalia

14F0087

Israel

1838574

Thailand

Содержание eServer 330 xSeries













































































Отзывы: