IBM eServer 200 xSeries, Руководство пользователя, Страница: 88 / 128

74
IBM xSeries 200: User’s Reference
202 System cache Aborted Test setup error: BIOS cannot access VPD
information If your system does not
have the latest level
BIOS code installed,
update the BIOS code to
the latest level and run
the diagnostic program
again.
If the problem persists,
call for service.
Test setup error: Corrupt DMI BIOS, information in
BIOS is not as expected
Test setup error: No L2 cache detected on
microprocessor socket id xyz or BIOS setup
problem
(where xyz identifies the microprocessor that is
causing the error message)
1. If your system does
not have the latest
level BIOS code
installed, update
the BIOS code to
the latest level
2. Run the diagnostic
program again.
3. If the problem
remains, replace
the failing
processor.
If the problem persists,
call for service.
Test setup error: Unknown hardware problem
associated with microprocessor in socket id xyz.
(where xyz identifies the microprocessor that is
causing the error message)
Failed Microprocessor in socket ID xyz
(where xyz identifies the microprocessor that is
causing the error message)
1. Reseat the
identified
microprocessor.
2. If the problem
remains, replace
the microprocessor.
If the problem persists,
call for service.
Warning Test setup error: Cache is disabled. Use system
setup to enable before retrying the test Use the Cache Control
choice under the
Advanced Setup menu,
under the
Configuration/Setup
Utility program main
menu, to enable the
cache.
If the problem persists,
call for service.
206 Diskette drive Failed Internal diskette drive bay Call for service.
215 CD-ROM Failed On system board. Call for service.
Aborted The CD-ROM drive is not present. Verify that the cables are
properly connected to
the CD-ROM drive. If the
problem persists, call for
service.
217 Hard disk drive Failed BIOS drive # n (where n is the drive bay number) Call for service.
Code Function Result Text message Action