IBM Deskstar 40GV, Инструкция по установке и справочник

Страница: 47 / 66

43
Appendix
Record your IBM Deskstar drive information here:
Serial number
Part number
Model number
Cylinders
Heads
Sectors
Capacity
Cables
40-pin, 40-conductor ATA/IDE cables
This cable type will support up to and including ATA/33 (UDMA mode 2). Cables cannot be in
excess of 18 inches and are limited to the attachment of 2 ATA devices plus the system board
connector. The jumper settings designate a Master or Slave drive, not the position of the drive on
the cable.
40-pin, 80-conductor ATA/IDE cables
This cable type is constructed using the Cable Select configuration. It will support Ultra ATA/100
and Ultra ATA/66 interface transfer rates and is backward compatible. The extra 40 conductors
are grounded shields to improve signal quality and reduce cross talk. The connectors of the 80-
conductor cable are color-coded. The black connector specifies Master drive connection, gray
specifies Slave drive connection, and blue specifies connection to the ATA/IDE port of the
motherboard or controller card.
Jumpers
Master
If the IBM Deskstar is the only drive on the cable or the Master drive on a two-drive cable, set the
jumpers for Master.