Installing and removing the handles
Install the handles on the storage enclosure before you move the unit onto the lift tool. After you install
the storage enclosure in the rack cabinet and remove the handles, store the handles for future use.
Installing the handles
Complete the following steps to install the handles on the storage enclosure:
1.
Locate the box of handles.
2.
To install a handle on the storage enclosure, place notch at the bottom of the handle in the opening in
the storage enclosure chassis, and push the handle in and up until the latch at the top of the handle
secures the handle to the chassis.
3.
Repeat step 2 for the three remaining handles.
Removing the handles
Before you install the storage enclosure completely into a rack cabinet, you must remove the handles.
Complete the following steps to remove the handles from the storage enclosure:
1.
To remove a handle to the storage enclosure, release the latch with your thumb and pull down and
away from the unit.
2.
Repeat step 1 for the three remaining handles.
3.
Store the handles for future use.
Thumb
latch
Handle
10
