IBM Cloud Object Storage System Slicestor 2212 Series, Руководство по обслуживанию и ремонту

Страница: 101 / 197

‡ —
Device List
For more information on each device select from the following list:
Device Location Status
Token Ring Slot 1 Multi-Port Adapter ENABLED
< 1. Token Ring> Slot 1 Port 1 Net # 0 ENABLED
< 2. Token Ring> Slot 1 Port 2 NOT CONFIGURED
ISDN BRI-S/T Slot 2 Multi-Port Adapter ENABLED
< 3.ISDN BRI S/T>Slot 2 Port 1 Net # 2 ENABLED
< 4.ISDN BRI S/T>Slot 2 Port 2 Net # 3 ENABLED
Some of the devices are not currently available for testing. This can occur
when a test is not available for the device or when the device must be
configured in order to be tested,
Select (1-4 or D=Down B=Back R=Refresh h=Help):
ˆ ˜
Figure 6-2. Sample of Device List Panel Showing Interfaces
The Device List is the starting point for running a test. It also provides a check
to determine if all of the installed devices are being recognized by the IBM
2212.
The Device List includes a summary status for each device. The devices that
are testable or that have additional status available can be selected. Selecting
a device will then display the Device Status and Control page for that device.
The Status displayed for a device may have the following values:
ENABLED Device is enabled for normal operation. For
multi-port devices this means that at least one
port is enabled. Diagnostic tests cannot be run
until the device has been disabled.
ENABLE PENDING Waiting for completion of Enable request.
Special Device is in a special state that is explained on
the Device Status and Control Page.
DISABLED Device is Disabled. Diagnostic testing can now
be performed. For multi-port Devices this
means that all ports are disabled.
DISABLE PENDING Waiting for completion of Disable request.
MESSAGE Select the device to view and respond to the
message.
TESTING The device is being tested.
NOT CONFIGURED The device is not configured for normal
operation.
MIS CONFIGURED The configuration does not match the physical
device.
HARDWARE ERROR A Hardware Error has been detected which
prevents further use of the device.
Chapter 6. Using Diagnostics
6-3