IBM CISCO R2E2, Руководство пользователя

Страница: 57 / 110

Chapter 4: Configuring the technology pack
IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack 53
Note:
Before proceeding to the next step, be sure you have configured each cucm.properties file in the directories
you created in Step 6.
9. CUCM environment only: Start all ProvisoCUCM applications by running the
startcucm.sh
file in each
directory that you created in Step 6.
ProvisoCUCM writes a log file in the same directory where its
ProvisoCUCM.jar
file is located. Monitor
the log file to make sure that ProvisoCUCM is successfully communicating with the CUCM server. Also,
verify that CSV files are being generated to the output directories (
cdr_output_dir
and/or
perfmon_output_dir
).
Note:
Be sure that all ProvisoCUCM instances are operating successfully before proceeding to the next step.
10. Define global variables.
Global variables are specific to each CCM or CUCM cluster. You assign values to global variables in either
of the following files:
—
CCMConfig.js
. with CCM clusters
—
CUCMConfig.js
with CUCM clusters
The Cisco IP Telephony Technology Pack includes the configuration files
CCMConfig.js
and
CUCMConfig.js
. In Step 2-e, you copied these files to
DATA_CHANNEL_HOME
/scripts/voip_cisco_ipt
(typically,
/opt/datachannel/scripts/voip_cisco_ipt
).
resend_sent_files If
true
, the CUCM server will re-send files that it has already successfully
sent. Since the CUCM can be configured to send data files to any host
specified by CUCM Web administration configuration settings, this field
must be set to
true
to ensure that data files are also sent to the
DataChannel host that requested them.
Use the
false
setting in the following situations:
• If you prefer to have the data files pushed back to the DataChannel host
according to a schedule specified by CUCM Web administration
configuration settings. Set the CUCM configuration to push the data
files back to the DataChannel server where the ProvisoCUCM instance
is running.
• If data files are being pushed back to the DataChannel host too slowly
for your needs.
If this field is
false
, the ProvisoCUCM instance will request the data files
from the CUCM server and receive none. It will then check for the data files
in the location specified by the CUCM Web administration configuration (at
time intervals specified by
run_interval
or
perfmon_interval
). If
the files are there, ProvisoCUCM retrieves the files and generates the CSV
output to
cdr_output_dir
(or
perfmon_output_dir
with Perfmon
data) on the DataChannel host that requested the data.
Example :
resend_sent_files=true
run_interval The interval, in milliseconds, at which ProvisoCUCM polls the CUCM
server for CDR and CMR data files, and checks
cdr_output_dir
for data
files pushed there by the CUCM server.
Example (15 minutes): run_interval=900000
Field Description