IBM BladeCenter T Series, Руководство по установке

Страница: 21 / 80

Chapter 2. Installing and removing a management
module
The following illustration shows the management-module bay locations on the
front of the BladeCenter T unit.
Management-module bay 1 Management-module bay 2
CMM
1
CMM
2
Installation guidelines
Before you begin to install the management module in the BladeCenter T unit,
read the following information:
v Read the safety information beginning on page v and the handling
guidelines in “Handling static-sensitive devices” on page 8. This information
will help you work safely with your BladeCenter T unit and options.
v Blue on a component indicates touch points, where you can grip the
component to remove it from or install it in the server, open or close a latch,
and so on.
v Orange on a component or an orange label on or near a component indicates
that the component can be hot-swapped, which means that you can remove
or install the component while the BladeCenter T unit is running. (Orange
can also indicate touch points on hot-swap components.) For complete
details about installing or removing a management module, see the detailed
information in this chapter.
© Copyright IBM Corp. 2004
7