IBM BladeCenter T Series, Руководство по установке

Страница: 26 / 80

Installing a management module
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts inside
these components. If you suspect a problem with one of these parts, contact
a service technician.
Complete the following steps to install a management module at the front of
the BladeCenter T unit:
1.
Read the safety information beginning on page v and “Installation
guidelines” on page 7 through “Handling static-sensitive devices” on page
8.
2.
If you are installing a second management module, read “Preparing for
management-module redundancy” on page 10.
Note: If you are replacing the only management module in the
BladeCenter T unit and the management module is functional, you
might want to save the configuration file to another medium before
you proceed (under the MM Control section in the navigation pane,
click Configuration File and follow the instructions under Backup
MM Configuration ). You will be able to restore the saved
configuration file to the replacement management module (under
the MM Control section in the navigation pane, click
Configuration
File and follow the instructions under Restore MM Configuration ).
See the IBM
Eserver
BladeCenter T Management Module User’s Guide
for more information.
12
BladeCenter T Management Module: Installation Guide