IBM BladeCenter QS21 Type 0792, Руководство по обслуживанию

Страница: 93 / 144

Memory initialization errors
The following table describes the memory initialization errors that can occur during
boot.
Table 11. Memory initialization errors
Code Message Description Action
E1006 Memory Incomplete. Not all the XDR system memory
could be initialized.
The blade server can still boot but
with reduced system memory.
Power down then reboot the
blade.
If this does not resolve the
problem, contact your IBM service
representative as the system
board may need replacing.
E1100 System memory init failure. Boot
abort.
The system XDR memory could
not be initialized. The boot process
has aborted.
Power down then reboot the
blade.
If this does not resolve the
problem, contact your IBM service
representative as the system
board may need replacing.
E1110 System memory test failure. Boot
abort.
An error has occurred while testing
the XDR memory.
Power down then reboot the
blade.
If this does not resolve the
problem, contact your IBM service
representative as the system
board may need replacing.
E1200 System memory init failure during
second-pass calibration. CPU
halted.
Since the first-pass calibration
succeeded, either the CPU or the
system XDR memory could have a
defective contact.
Power down then reboot the
blade.
If this does not resolve the
problem, contact your IBM service
representative as the system
board may need replacing.
E1210 Memory controller failed. CPU
halted.
The built-in memory controller of
the CPU encountered an
unexpected error.
Power down then reboot the
blade.
If this does not resolve the
problem, contact your IBM service
representative as the system
board may need replacing.
W1250 Timing Calibration failed: BE...
YRAC... DQ... pin...
Note: < xx... > indicates the
number of the pin where the error
has occurred.
This warning message
accompanies a later memory
initialization error message and
lists the pin number for help in
locating the cause of the error.
See the accompanying memory
initialization error message for
further information.
USB errors
The following table describes boot list errors. These may occur when booting from a
bootable CD or DVD.
Chapter 5. Diagnostics and troubleshooting
75