manualshive.com logo in svg

IBM Aptiva 2190, Техническое обслуживание оборудования, Страница: 81 / 165

Поделиться
Скачать
IBM Aptiva 2190 Скачать руководство пользователя страница 81

2-17

Table 2-3

Error Symptoms List

Error Symptoms

Action/FRU

NOTE:

To diagnose a problem, first find the error symptom in the left

column.  If directed to a check procedure, replace the FRU indicated in the
check procedure.  If no check procedure is indicated, the first Action/FRU
listed in right column is the most likely cause.

Diskette drive does not work.

Make sure that the diskette drive is not set to
[None] in the “Standard CMOS Setup” of
BIOS Setup.

Diskette drive power

Diskette drive connection/cable

Diskette drive

System board

Diskette drive test failed.

Diskette

Diskette drive

Diskette drive cable

System board

Hard Disk Drive

NOTE:

Ensure hard disk drive is configured correctly in BIOS Setup,

cable/jumper are set correctly before diagnosing any hard disk drive
problems.

Hard disk drive test failed.

Load default settings.

Hard disk drive cable.

Hard disk drive.

System board.

Hard disk drive format error.

Load default settings.

Hard disk drive cable.

Hard disk drive.

System board.

Hard disk drive write error.

Load default settings.

Hard disk drive.

Содержание Aptiva 2190






































































































































































Отзывы:

Нет отзывов