IBM Aptiva 2190 Скачать руководство пользователя страница 3

.

First Edition (September 1999)

The following paragraph does not apply to any state or country where such
provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.  References to IBM products, programs, or
services do not imply that IBM intends to make them available outside the
United States.  This publication could include technical inaccuracies or
typographical errors. Changes are periodically made to the information herein;
these changes will be made in later editions.  IBM may make improvements
and/or changes in the product(s) and/or the program(s) at any time. Address
comments about this publication to IBM Corporation, Dept. E23/962-2, 455
Park Place, Lexington, KY 40511-1856, USA.  Information you supply may be
used by IBM without obligation. For copies of publications related to this
product, call toll free 1-800-IBM-7282 in the Continental U.S.A.  In Canada,
call toll free 1-800-465-7999.

© Copyright International Business Machines Corporation 1999.
All rights reserved.

Note to U.S. Government Users – Documentation related to restricted rights –
Use, duplication or disclosure is subject to restrictions set forth in GSA ADP
Schedule Contract with IBM Corp.

Содержание Aptiva 2190






































































































































































Отзывы: