IBM Aptiva 2190 Скачать руководство пользователя страница 115

Страница: 115 / 165

4-3

Identifying the Parts of the System Unit

This computer system has 3 bays, each bay has an factory-installed drive in it.

The devices are 3.5” Diskette, 40X CD-ROM drive and 4.0 GB hard disk (some

models may have hard disk of 6 or 8 GB capacity).

Diskette drives in this unit use the standard diskette advanced technology (AT)

Interface. Hard disk and CD-ROM drives in this unit use an integrated drive

Electronics (IDE) AT interface. This computer supports the American National

Standard Institute (ANSI) standard for AT attachment disk drives and CD-ROMs.

This system has 3 interface cards slots for adapter card expansion. All of them

are Peripheral Component Interconnect (PCI) interfaces.

Some models of this system have a 10/100 Mbps Ethernet port on board.

Some models of this system have a DFP(Digital flat panel) port.

Содержание Aptiva 2190






































































































































































Результаты поиска

Содержание Aptiva 2190

Отзывы:

IBM Aptiva 2190, Техническое обслуживание оборудования, Страница: 115 / 165

Результаты поиска

Содержание Aptiva 2190

Отзывы: