IBM Aptiva 2159, Руководство пользователя

Страница: 31 / 214

Ÿ
One, 168-pin Gold, EDO, 60 ns, Parity or Non-Parity DIMM module.
Depending on model, 16 MB or 32 MB of system memory is supplied.
Maximum system board memory is 128 MB. Refer to “System Memory”
on page 1-25 and to “SIMM Configurations” on page 5-16.
Ÿ
Ports: serial, USB (Universal Serial Bus), parallel, keyboard, mouse,
and video.
Ÿ
Connectors for:
– PCI/ISA riser card (212-pin)
– VESA Video Feature (2x20 un-shrouded)
– Input power (12-pin)
– AT diskette drives (34-pin)
– Two 40-pin Enhanced IDE drive controllers: a primary local bus
IDE that supports two hard disk drives and a secondary Enhanced
IDE that supports a CD-ROM drive and one hard disk drive, or two
hard disk drives.
Note: Enhanced IDE for the Type A system board supports up to
Mode 4. Mode 1, 2, 3, 4, etc. are the progressive industry levels
for Enhanced IDE.
Ÿ
Power light-emitting diode (LED)/hard disk LED (4-pin)
Ÿ
12 volt supply for external speakers
Ÿ
Power-on switch 2-wire connector and a power supply auxiliary control
3-wire connector for Rapid Resume features.
Ÿ
Wake Up on Ring connector for Rapid Resume automatic wake-up
features.
Ÿ
Lithium battery.
Processors
One of the following processors can be installed:
Ÿ
Pentium P54C-133 MHz internal; 66 MHz external
Ÿ
Pentium P54C-150 MHz internal; 60 MHz external
Ÿ
Pentium P54C-166 MHz internal; 66 MHz external
Ÿ
Pentium P54C-200 MHz internal; 66 MHz external
Ÿ
Pentium P55C-166 MHz internal; 66 MHz external
Ÿ
Pentium P55C-200 MHz internal; 66 MHz external
General Information
1-7