4.1
Determine where in the rack to place the server. This server occupies two EIA units.
Remove any filler panels necessary to allow adequate access to the location where
you will install your server.
If you do not have enough space around your rack to open the front and back doors
completely, remove the doors before starting this task to allow adequate access.
Install the slide rail assemblies
4
4.2
Install the slide rail assemblies.
A
B
C
D
D
C
Pull the front and back blue latch-assembly release tabs
and use the blue
tabs
to push the latch assembly
into the retracted position. Make sure both
front and back slide-rail pins
are fully retracted.
B
C
D
A
1.
Front view
Note:
Install units into the lower part of the rack first. Place larger and heavier
units in the lower part of the rack.
