5
5.1
5.3
5.4
5.5
5.2
5.6
Fully extend both slide rails.
Lift the server, and position it over the extended slide rails.
Use a screwdriver to tighten the system-retaining screws that you may have
installed in step 4.3.
Use safe practices when lifting.
Align the slots
on the server chassis with the tabs
on the slide rails.
B
A
Lower the server onto the slide rails, ensuring that the slots
and tabs
align
correctly, and the server is securely seated onto the slide rails.
B
A
Simultaneously pull the blue safety latches
on the slide rails of each side of the
server, and carefully push the server into the rack.
C
C
B
B
A
A
Install the server onto the slide rail assembly
Before you begin:
Read this entire task before completing any individual steps.
Before installing the server onto the slide rail assembly, ensure that the
leveling feet are extended and that the stabilizer bracket is correctly installed
to prevent the rack from falling forward.
18-32 kg (39.7-70.5 lbs)
