IBM 8852 - BladeCenter H Rack-mountable, Инструкция по установке и эксплуатации

Страница: 38 / 82

Removing a blower module
Your BladeCenter might be equipped with standard blower modules (part number
44E5083), or it might be equipped with high-efficiency blower modules (part number
68Y8205). The standard and high-efficiency blower modules are not
interchangeable and should not be mixed in the same BladeCenter unit.
To remove a blower module, complete the following steps.
Handle (open)
Release button
1. Read the safety information that begins on page v and “Installation guidelines”
on page 18.
2. Press the release button on the blower handle and rotate the handle to the
open position (rotate to the right for the upper blower module or to the left for
the lower blower module).
3. Using the handle, pull the blower module out of the bay.
Removing an I/O module
To remove an I/O module or module filler, complete the following steps.
I/O
module
Module
filler
I/O module
Single
module
filler
Double
module
filler
Release handles
(open)
Release handle
(open)
1. Read the safety information that begins on page v and “Installation guidelines”
on page 18.
22
BladeCenter H Type 8852, 7989, and 1886: Installation and User’s Guide