IBM 8676 - Eserver xSeries 335, Руководство по техническому обслуживанию и ремонту, Страница: 77 / 172

Ethernet connector
The following illustration shows the dual Ethernet connector.
1 8
1 8
Ethernet 1 port
activity LED Ethernet 2 port
activity LED
Connect a Category 3, 4, or 5 unshielded twisted-pair cable to this connector. The
100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
For more information about the Ethernet controller, see “Configuring the Gigabit
Ethernet controller” on page 17.
Integrated system management connector
Use this connector to connect an optional Remote Supervisor Adapter. See “Cabling
the server” on page 59 for information about using a Remote Supervisor Adapter to
manage servers on an ASM interconnect network. The following illustration shows
an integrated system management connector.
1
8
Serial connector
Use a serial connector to connect a serial device. The following illustration shows a
serial connector.
1 5
6 9
Universal Serial Bus connectors
Use a Universal Serial Bus (USB) connector to connect a USB device. USB
technology transfers data at up to 12 Mb per second (Mbps) with a maximum of
127 devices and a maximum signal distance of 5 meters (16 ft) per segment. Using
Plug and Play technology, USB devices are configured automatically. The following
illustration shows a USB connector.
4 3 2 1
Chapter 4. Customer replaceable units
67