IBM 8676 - Eserver xSeries 335, Руководство по техническому обслуживанию и ремонту, Страница: 22 / 172

configuration automatically configures the controller, and you can use Custom
configuration to configure the controller manually.
Note: If the integrated RAID controller has two channels, it will appear in the
ServeRAID Manager tree as two controller objects. However, you can
configure only one array and one RAID level-1 logical drive.
Using Express configuration: Express configuration automatically configures the
controller. It creates an array by grouping together the first two physical drives that
appear in the ServeRAID Manager tree, and it creates a RAID level-1 logical drive.
Complete the following steps to use Express configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Express configuration .
3. Click Next . The “Configuration summary” window opens.
4. Review the information that is displayed in the “Configuration summary” window.
To change the configuration, click Modify arrays .
5. Click Apply ; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the controller and in the physical
drives.
6. Exit from the ServeRAID Manager program and remove the CD from the
CD-ROM drive.
7. Restart the server.
Figure 2. “Configuration summary” window
12
xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide