IBM 8647 - Eserver xSeries 225, Руководство по установке

Страница: 53 / 112

b. Slide the adapter airflow guide into the guides on the air baffle and front
adapter-support bracket; then, push it into place, using care to not damage
any cables.
c. Rotate the front and rear adapter-retention brackets to the closed (locked)
position.
13. If you have other options to install or remove, do so now; otherwise, replace
the support bracket and go to “Completing the installation” on page 34.
Installing a security rope clip
To help prevent theft, you can add a security rope clip and cable to your server.
Complete the following steps to install a rope clip:
1. Remove the side cover (see “Removing the side cover” on page 11).
2. Use a screwdriver to remove the two metal knockouts.
3. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
4. Thread a cable through the rope clip and around an object that is not part of or
permanently secured to the building structure or foundation, and from which the
cable cannot be removed. Fasten the cable ends together with a lock. After you
add the security cable, be certain it does not interfere with other cables
connected to the server.
Rope clip
5. If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 34.
Chapter 2. Installing options
33