IBM 8647 - Eserver xSeries 225, Руководство по установке

Страница: 36 / 112

6. Set any jumpers or switches on the adapter or system board according to the
documentation that comes with the adapter.
Attention: Avoid touching the components and gold-edge connectors on the
adapter.
7. If you are installing a full-length adapter, remove the blue adapter guide (if any)
from the end of the adapter.
Adapter guide
Attention: Be certain that the adapter is correctly seated in the expansion
slot before you turn on the server. Incomplete installation of an adapter might
damage the system board or the adapter.
8. Carefully grasp the adapter by the top edge or upper corners, and align it with
the expansion slot guides; then, press the adapter firmly into the expansion
slot. Move the adapter directly from the static-protective package to the
adapter slot.
Rear adapter-
retaining
bracket
Front adapter-
bracket retaining
Expansion-slot
cover
Adapter
9. Connect required cables to the adapter. Route cables so that they do not block
the flow of air from the fans. If you are installing an optional SCSI adapter, see
“Cabling an optional SCSI adapter” on page 18 for additional information.
10. If you have another adapter to install, repeat steps 3 through 9.
16
IBM xSeries 225 Type 8647: Installation Guide