IBM 7379E2U Скачать руководство пользователя

Страница: 94 / 152

7. Touch the static-protective package that contains the drive to any unpainted

metal surface on the server; then, remove the drive from the package and
place it on a static-protective surface.

8. Align the drive assembly with the guide rails in the bay (the connector end of

the drive goes in first).

9. Press the drive assembly loops toward each other; then, carefully slide the

drive assembly into the drive bay until it stops and release the loops.

Note:

Do not release the loops on the drive assembly until it is completely

seated.

10. See the

Problem Determination and Service Guide

for cabling information, if

needed.

11. Close the drive bay EMC shield.

12. Close the bezel.

If you have other options to install or remove, do so now.

The simple-swap-drive backplate controls the IDs for the internal simple-swap drive
bays. The following table lists the IDs for the hard disk drives and backplate that
are connected to simple-swap models.

IBM System x3400 M3 Type 7378/7379: Installation and User's Guide

Содержание 7379E2U

























































































































































Результаты поиска

Содержание 7379E2U

Отзывы:

Похожие инструкции для 7379E2U

Бренды по названию

Популярные бренды

IBM 7379E2U, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 7379E2U

Отзывы:

Похожие инструкции для 7379E2U

Бренды по названию

Популярные бренды