IBM 7379E2U, Инструкция по установке и эксплуатации

Страница: 126 / 152

v
A virtual media key, which enables remote presence support (remote video,
remote keyboard/mouse, and remote storage).
v Automatic Server Restart (ASR) when POST is not complete or the operating
system hangs and the OS watchdog timer times out. The IMM might be
configured to watch for the OS watchdog timer and restart the server after a
timeout, if the ASR feature is enabled. Otherwise, the system administrator can
generate an NMI by pressing an NMI button on the information panel for an
operating-system memory dump. ASR is supported by IPMI.
v Boot sequence manipulation.
v
Command-line interface.
v Configuration save and restore.
v
DIMM error assistance. The Unified Extensible Firmware Interface (UEFI)
disables a failing DIMM that is detected during POST, and the IMM lights the
associated system-error LED and the failing DIMM error LED.
v Environmental monitor with fan speed control for temperature, voltages, fan
failure, and power supply failure.
v
Intelligent Platform Management Interface (IPMI) Specification V2.0 and
Intelligent Platform Management Bus (IPMB) support.
v
Invalid system configuration (CNFG) LED support.
v Light path diagnostics LEDs to report errors that occur with fans, power supplies,
microprocessor, hard disk drives, and system errors.
v
NMI detection and reporting.
v Operating-system failure blue screen capture.
v
PCI configuration data.
v PECI 2 support.
v
Power/reset control (power-on, hard and soft shutdown, hard and soft reset,
schedule power control).
v
Query power-supply input power.
v ROM-based IMM firmware flash updates.
v
Serial over LAN (SOL).
v Serial redirect.
v
System-event log.
v When one of the two microprocessors reports an internal error, the server
disables the defective microprocessor and restarts with the one good
microprocessor.
The IMM also provides the following remote server management capabilities
through the OSA SMBridge management utility program:
v
Command-line interface (IPMI Shell)
The command-line interface provides direct access to server management
functions through the IPMI 2.0 protocol. Use the command-line interface to issue
commands to control the server power, view system information, and identify the
server. You can also save one or more commands as a text file and run the file
as a script.
v Serial over LAN
Establish a Serial over LAN (SOL) connection to manage servers from a remote
location. You can remotely view and change the UEFI settings, restart the server,
identify the server, and perform other management functions. Any standard Telnet
client application can access the SOL connection.
v
Virtual Media Key
110
IBM System x3400 M3 Type 7378/7379: Installation and User's Guide