IBM 7316 - TF1 Rack Console, Руководство по установке и обслуживанию

Страница: 24 / 54

Note: When the monitor and keyboard are not in use, if the rack cabinet is in a vibration-prone area, or
during cabinet relocation, tighten the two thumbscrews on the front of the tray to secure the tray
inside the rack cabinet.
Thumbscrew
Installing the Optional Console Switch
Attention: Before beginning, read “Safety Considerations” on page 3.
You can use the console switch (Feature Code 4200 or 4202) to attach more than one server to a single
monitor and keyboard. The console-switch option is available separately, but custom mounting brackets for
the switch come with this kit.
By installing the console switch behind the monitor and keyboard tray, both can occupy the same space in
the rack. To install the console switch behind the tray, use the brackets provided with this kit.
Attention: The console switch will extend beyond the rear rack-mounting flanges when you install the
switch behind the tray.
To install a console switch behind the tray, complete the following steps:
1. Attach the left-side bracket to the left side of the console switch using two 8-32 screws. Then, attach
the right-side bracket to the right side of the console switch.
Note: The left-side bracket has a channel for you to route the power, video, and keyboard-and-mouse
cables. Make sure that you attach the brackets to the console switch so that the channel on the
left-side bracket faces upward.
8
1
A
2
3
4
5
6
7
Console switch
Left-side bracket
Right-side bracket
10
7316-TF3 17-Inch Flat Panel Rack-Mounted Monitor and Keyboard: Installation and Maintenance Guide