IBM 7316 - TF1 Rack Console, Руководство по установке и обслуживанию

Страница: 33 / 54

9. Tighten the two rail-adjustment screws on each of the outer rails that you loosened in step 6 on page
17.
10. Loosen the front four slide-rail bracket screws; then, insert the rail-alignment spacer into the slide-rail
middle holes. The rail-alignment spacer must wrap around the rails to align them correctly. Tighten
the front four screws and remove the spacer.
Note: Do not tighten the four rear slide-rail bracket screws at this time.
Rail-alignment spacer
11. Remove the screw and the nut that attach the inner slide rails to the monitor and keyboard assembly.
Attach the new inner slide rails to the tray.
12. For instructions on reinstalling the monitor and keyboard tray in the rack cabinet, go to “Installing the
Monitor and Keyboard Tray into a Rack” on page 4.
13. Install any other devices that you removed from the rack cabinet.
Chapter 4. Hardware Maintenance Information
19