IBM 72335LU - System x3850 M2, Руководство пользователя

Страница: 69 / 96

Select this choice enable or disable the execute disable bit feature. Enable
is the default value.
- Intel Virtualization Technology
Select this choice to enable or disable the Intel virtualization technology.
Select Enable to make available the additional hardware capabilities of
virtual machine extensions. Enable is the default value.
- Processor IP Prefetcher
Select this choice to enable or disable the IP prefetcher. Enable is the
default value.
- Processor DCU Prefetcher
Select this choice to enable or disable the DCU prefetcher. Enable is the
default value.
- C1E
Select this choice to enable or disable the C1E feature. The C1E feature
reduces microprocessor power consumption. Enable is the default value.
– TPM Menu
Select this choice to set the trusted platform module (TPM) feature. For more
information, see http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=MIGR-5072502&brandind=5000008.
– Partition Chassis Options
Select this choice to set the partition configuration options for use in a
multi-node configuration.
– Advanced PCI Settings
Select this choice to view and set the end-to-end cyclic redundancy check
(ECRC) of individual PCI Express slots. ECRC is a data transmission error
detection feature. You can also enable or disable the ROM execution of
individual PCI Express slots.
– PCI Slot/Device Information
Select this choice to view system resources that are used by installed PCI
Express devices. PCI Express devices are usually configured automatically.
This information is saved when you exit. The Save Settings , Restore
Settings , and Load Default Settings choices on the Configuration/Setup
Utility main menu do not save the PCI Slot/Device Information settings.
– RSA II Settings
Select this choice to view and change Remote Supervisor Adapter II settings.
Select Save Values and Reboot RSA II to save the changes that you have
made in the settings and restart the Remote Supervisor Adapter II.
- RSA II MAC Address
This is a nonselectable menu item that displays the Remote Supervisor
Adapter II MAC address.
- DHCP IP Address
This is a nonselectable menu item that displays the Remote Supervisor
Adapter II DHCP IP address, if DHCP is enabled.
- DHCP Control
Select this choice to set the DHCP control. DHCP Enabled is the default. If
you select Use Static IP , use Static IP Address to set the address.
- Static IP Address
Select this choice to set the static IP address for the Remote Supervisor
Adapter II.
Chapter 3. Configuring the server
57