IBM 7208 Скачать руководство пользователя страница 68

Страница: 68 / 92

4.3 Removing and Replacing the Drive

To remove the drive from the 7208 Tape Drive:

1. Perform the cover removal procedure. Refer to "Removing and Replacing the Cover" in topic 4.2.

2. Tilt the 7208 Tape Drive on its side. Support the drive ( 1 in Figure 20) while removing the four screws 2 that secure the drive to the

chassis.

3. Support the drive while returning the 7208 Tape Drive to its original position.

4. Disconnect the power supply connector (J1) 3 from the drive.

5. Disconnect the internal SCSI bus cable 4 from the drive.

Note: To remove the cable, grasp the connector and pull it towards you. Do not pull on the cable.

6. Disconnect the internal SCSI address cable 5 from the drive.

7. Slide the drive forward and out of the chassis.

7208 Tape Drive Service Guide

Removing and Replacing the Drive

¦ Copyright IBM Corp. 1998

4.3 - 1

All manuals and user guides at all-guides.com

Содержание 7208





























































































Результаты поиска

Содержание 7208

Отзывы:

IBM 7208, Руководство по обслуживанию, Страница: 68 / 92

Результаты поиска

Содержание 7208

Отзывы: