IBM 71412RU Скачать руководство пользователя | Manualshive

Страница: 82 / 102

background image

Using the Boot Menu program

The Boot Menu program is a built-in configuration program that you can use to
temporarily redefine the first startup device without changing settings in the
Configuration/Setup Utility program.

To use the Boot Menu program, complete the following steps:

1. Turn off the server.

2. Restart the server.

3. Press F12.

4. Select the startup device.

The next time the server is started, it returns to the startup sequence that is set in
the Configuration/Setup Utility program.

Configuring the Gigabit Ethernet controller

The Ethernet controller is integrated on the I/O board. It provides an interface for
connecting to a 10 Mbps, 100 Mbps, or 1 Gbps network and provides full-duplex
(FDX) capability, which enables simultaneous transmission and reception of data on
the network. If the Ethernet ports in the server support auto-negotiation, the
controller detects the data-transfer rate (10BASE-T, 100BASE-TX, or 1000BASE-T)
and duplex mode (full-duplex or half-duplex) of the network and automatically
operates at that rate and mode.

You do not have to set any jumpers or configure the controller. However, you must
install a device driver to enable the operating system to address the controller. For
device drivers and information about configuring the Ethernet controller, see the

Broadcom NetXtreme Gigabit Ethernet Software

CD that comes with the server. To

find updated information about configuring the controller, complete the following
steps.

Note:

Changes are made periodically to the IBM Web site. The actual procedure

might vary slightly from what is described in this document.

1. Go to http://www.ibm.com/systems/support/.

2. Under

Product support

, click

System x

.

3. Under

Popular links

, click

Publications lookup

.

4. From the

Product family

menu, select

System x3850 M2

or

System x3950 M2

and click

Continue

.

Using the baseboard management controller utility programs

Use the baseboard management controller utility programs to configure the
baseboard management controller, update baseboard management controller
firmware, and remotely manage a server.

Using the configuration utility program

Use the baseboard management controller configuration utility program to view or
change the baseboard management controller configuration settings and to save
the configuration to a file for use on multiple servers. The configuration utility is
located with the baseboard management controller firmware updates on the
firmware update diskette or CD. You can access the configuration utility after the
firmware update is started and completed or stopped before completing.

70

IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: User’s Guide

«
...
80
81
82
83
84
...
»

Содержание 71412RU







































































































Отзывы:

Нет отзывов

Похожие инструкции для 71412RU

totalstorage 200

Бренд: IBM Страницы: 152

System x3650 M5

Бренд: IBM Страницы: 1010

Crestron 908012

Бренд: SIERRA VIDEO SYSTEMS Страницы: 32

Бренд: MISUMI Страницы: 18

x3350 - System - 4192

Бренд: IBM Страницы: 98

x3500 - System - 7977

Бренд: IBM Страницы: 124

Бренд: IBM Страницы: 106

x3200 - System M3 - 7328

Бренд: IBM Страницы: 100

System x3400 Type 7975

Бренд: IBM Страницы: 124

System x3300 M4

Бренд: IBM Страницы: 470

System x iDataPlex dx360

Бренд: IBM Страницы: 26

Бренд: Advantech Страницы: 38

DIRECTORY SERVER 8.0

Бренд: Red Hat Страницы: 128

Бренд: Kathrein Страницы: 20

MAP-9101-10 Series

Бренд: decrane aerospace Страницы: 30

Supero SuperServer 5016I-T

Бренд: Supero Страницы: 98

Supero SC808LT-780B

Бренд: Supero Страницы: 60

SUPER SuperServer 5036I-IF

Бренд: Supero Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды