IBM 71412RU, Руководство пользователя

Страница: 52 / 102

designated as Disabled in the Memory Settings menu. In this case, you must
re-enable the row in the Configuration/Setup Utility program or reload the default
memory settings.
v When you restart the server after you add or remove a DIMM, the server
displays a message that the memory configuration has changed.
v
Populate the memory-card connectors in numeric order, starting with connector 1.
The following illustration shows the locations of the memory-card connectors.
Memory card 2
Memory card 1
Memory card 3
Memory card 4
1 2 3 4
v The following illustration shows the DIMM connectors on the memory card.
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
DIMM 7
DIMM 8
v
Install the DIMMs on each memory card in the order shown in the following
tables, depending on which memory configuration you want to use. You must
install at least one pair of DIMMs on each memory card.
Table 5. Low-cost memory-card installation sequence
DIMM pair installation
order
Memory card Connector numbers
First 1 1 and 5
Second 2 1 and 5
Third 1 2 and 6
Fourth 2 2 and 6
40
IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: User’s Guide