1-7
14
Customizing Your Monitor
Changing the on-screen display position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
Press the
button.
The MENU OSD appears.
2
Press the
.
/
>
buttons to select “
OPTION” and
press the
button again.
The OPTION OSD appears.
3
Press the
.
/
>
buttons to select “
(OSD H
POSITION)” or “
(OSD V POSITION).”
Select “
(OSD H POSITION)” to adjust the horizontal
position.
Select “
(OSD V POSITION)” to adjust the vertical
position.
4
Press the
?
/
/
buttons to move the OSD to the
desired position.
Press the
button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the
?
(reset) button while the OSD is on.
Locking the controls
You can protect adjustment data by locking the controls.
1
Press the
button.
The MENU OSD appears.
2
Press the
.
/
>
buttons to select “
OPTION” and
press the
button again.
The OPTION OSD appears.
3
Press the
.
/
>
buttons to select “
(CONTROL
LOCK).”
4
Press the
/
button to select “ON.”
Press the
button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
Only the
u
(power) switch, EXIT, and “
(CONTROL
LOCK)” of the “
OPTION” OSD will operate. If any other
items are selected, the
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the
?
button to
select “OFF.”
OSD H
POS I T I ON
2 6
OPT I ON
OSD V
POS I T I ON
2 6
OPT I ON
CON TRO L
LOCK
OF
•
F
ON
•
OPT I ON
DEGAUS
S
ON
OPT I ON
DEGAUS
S
ON
OPT I ON
15
EN
Customizing Your Monitor
Resetting the Adjustments
Resetting an
adjustment item
1
Press the
and
.
/
>
buttons to select the OSD
containing the item you want to reset, and press the
button again.
2
Press the
.
/
>
buttons to select the item you want to
reset.
3
Press the
?
(reset) button.
Resetting all of the adjustment data for
the current input signal
When there is no OSD displayed, press the
?
(reset)
button.
All of the adjustment data for the current input signal is
reset to the factory settings.
Note that the following items are not reset to the factory
settings.
•
OSD language
•
adjustment mode in the COLOR OSD (EASY, EXPERT,
sRGB)
•
OSD position
•
control lock function
Resetting all of the adjustment data for all
input signals
Press and hold the
?
(reset) button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the factory settings.
Note
The
?
(reset) button does not function when
(CONTROL
LOCK) is set to ON.
Technical Features
Plug & Play
This monitor complies with the DDC1, DDC2B and DDC2Bi
Display Data Channel (DDC) standards of VESA.
When a DDC1 host system is connected, the monitor
synchronizes with the V. CLK in accordance with the VESA
standards and outputs the EDID (Extended Display
Identification Data) to the data line.
When a DDC2B or DDC2Bi host system is connected, the
monitor automatically switches to the appropriate standard.
Damper Wires
When viewing a white background, very thin horizontal
lines may be visible on the screen as shown below. These
lines are the shadows of the damper wires and are
characteristic of CRTs that use aperture grilles. The wires
are attached to the aperture grille on the inside of the
Trinitron tube and prevent the vibration of the aperture
grille.
Damper wires
Customizing Your Monitor
