IBM 6385 Скачать руководство пользователя страница 57

Страница: 57 / 86

Reinstalling a system-board tray in a 3U chassis

Note:

You must remove the 3U chassis from the iDataPlex rack before you install

the system-board tray (see “Removing a 3U chassis from an iDataPlex rack” on
page 25).

To reinstall a system-board tray in a 3U chassis, complete the following steps:

1. Slide the system-board tray into the 3U chassis until it stops.

2. Reconnect the cables that connect the system-board tray and optional adapter

to the 3U chassis.

3. Turn the fan assembly so that the connector aligns correctly with the connector

in the power supply.

4. Insert the fan assembly into the 3U chassis. Firmly press the fan assembly

straight down into the chassis by applying pressure on both fan-assembly
handles simultaneously.

5. Reinstall the retention bracket.

6. Align the top-cover assembly with the rear of the 3U chassis; then, slide it

forward until it clicks into place.

7. Reinstall the 3U chassis in the iDataPlex rack (see “Reinstalling a 3U chassis

in an iDataPlex rack” on page 46).

8. Install the hard disk drives (see “Installing a hard disk drive” on page 37).

9. Reconnect the cables on the front of the system-board tray.

Chapter 3. Installing optional devices

Содержание 6385























































































Результаты поиска

Содержание 6385

Отзывы:

Похожие инструкции для 6385

Бренды по названию

Популярные бренды

IBM 6385, Руководство пользователя

Результаты поиска

Содержание 6385

Отзывы:

Похожие инструкции для 6385

Бренды по названию

Популярные бренды