IBM 6385, Руководство пользователя

Страница: 48 / 86

7. Touch the static-protective package that contains the adapter that you are
installing to any unpainted metal surface on the chassis or rack; then, remove
the adapter from the static-protective package. Avoid touching the components
and gold-edge connectors on the adapter.
8. If you are installing a full-length adapter, remove the blue adapter guide (if any)
from the end of the adapter.
Adapter guide
9. Follow the instructions that come with the adapter to set any jumpers or
switches.
10. Carefully grasp the adapter by the top edge or upper corner, and insert it in the
two-slot riser card. Align the adapter with the connector on the riser card; then,
press the adapter firmly into the connector.
11. If you have another adapter to install, do so now. Otherwise, continue with step
13.
12. If any cables need to be connected to an adapter, connect them. These cables
should be routed through the hole at the side of the expansion enclosure.
13. Align the tabs on the PCIe adapter bay cover with the holes on the expansion
enclosure; then, slide the PCIe adapter bay cover toward the rear of the
expansion enclosure until it stops.
14. Install the PCIe adapter bay cover screws.
15. Follow the cabling instructions, if any, that come with the adapter. If possible,
route the adapter cables before you install the expansion enclosure on the
chassis.
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 42.
36
IBM dx340 User’s Guide