IBM 325 8639 Скачать руководство пользователя страница 79

Страница: 79 / 145

7. Follow the on-screen prompts to exit from the adapter

configuration utility program.

8. Replace the system cover.

Go to “Device Driver Installation” for device driver
installation instructions.

Device Driver Installation:

If the operating system is OS/2, go to “OS/2 Device Driver
Installation.”

If the operating system is Windows NT, go to “Windows
NT Device Driver Installation.”

If the operating system is Novell NetWare, go to “Novell
NetWare Device Driver Installation” on page 75.

OS/2 Device Driver Installation:

The OS/2 adapter device driver is stored in the C:\OS2
and C:\OS2\DLL directories unless otherwise specified by
you. The CONFIG.SYS file is also updated.

To install the adapter device driver and dynamic link library
(DLL):

1. Insert the adapter configuration diskette into the

diskette drive.

2. Open an OS/2 window.
3. At the OS/2 prompt type:

and press Enter.

4. At the A: prompt type:

OS2\SETUP

and press Enter.

5. Follow the menu prompts to complete the installation.
6. Restart the system to activate the device driver.

Refer to the TME 10 NetFinity Version 4.1 documentation
for information on the operation and functions of the
adapter.

Windows NT Device Driver Installation:

The Windows NT adapter device drivers are stored in the
Windows NT system directories.

To install the adapter device drivers:

1. Insert the adapter configuration diskette into the

diskette drive.

2. Log on with administrator privileges.
3. Open a DOS window.
4. At the DOS prompt type:

and press Enter.

5. Type

CD\NT

and press Enter.

6. Type

SETUP

PC Server HMM

Содержание 325 8639


















































































































































Результаты поиска

Содержание 325 8639

Отзывы:

Бренды по названию

Популярные бренды

IBM 325 8639, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 325 8639

Отзывы:

Бренды по названию

Популярные бренды