IBM 325 8639 Скачать руководство пользователя страница 59

Страница: 59 / 145

NDIS 2.01 Driver Messages:

This section contains the error messages for the NDIS
2.01 drivers. The explanation and recommended action
are included with each message.

PCNTND-DOS-1 Unable to open the Protocol Manager.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PCNTND-DOS-6 Out of memory while allocating

buffers.

Explanation: The driver could not allocate the requested
buffers.

Action: Check the system configuration. Edit the
PROTOCOL.INI file to reduce the number of Txbuffers and
Rxbuffers specified for the driver.

PCNTND-DOS-7 Protocol Manager device error.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PCNTND-DOS-8 Bad status for Protocol Manager.

Explanation: The NDIS stack is not configured correctly.

Action: Check and correct the configuration.

PCNTND-DOS-9 Cannot find PROTOCOL.INI entry.

Explanation: The NDIS stack is not configured properly
in the PROTOCOL.INI file.

Action: Check and correct the configuration.

PCNTND-DOS-10 The Protocol Manager ioctl failed.

Explanation: The NDIS stack is not configured properly
in the PROTOCOL.INI file.

Action: Check and correct the configuration.

PCNTND-DOS-11 Protocol Manager registration failed.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PC Server HMM

Содержание 325 8639


















































































































































Результаты поиска

Содержание 325 8639

Отзывы:

Бренды по названию

Популярные бренды

IBM 325 8639, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 325 8639

Отзывы:

Бренды по названию

Популярные бренды