IBM 325 8639, Руководство по техническому обслуживанию аппаратной части

Страница: 33 / 145

you must use the PC Server EISA Configuration Diskette
for the system you are servicing to create a unique .CFG
file for each adapter.
Note
The unique .CFG file is system resource sensitive. To
use a configured adapter card in another system, the
adapter configuration must be cleared. See the
instructions that were supplied with the adapter.
To create a unique .CFG file for an ISA adapter, do the
following:
1. Insert the IBM PC Server EISA Configuration Diskette
for the system you are servicing into diskette drive A.
2. Start the configuration utility program.
3. At the main menu, select Step 2, Add or remove
boards.
4. At the next menu, select the slot in which you
installed the adapter.
5. At the next screen, select OK.
6. At the next screen, press F5; then, select Create
.CFG file.
7. Press Enter.
8. At the Create a board CFG file screen, type in the
adapter manufacturer and description (for example
IBM Token Ring); then, press Enter.
9. Refer to the adapter documentation for information
about specific configuration parameters (such as IRQ
or DMA channel) required for the adapter. Then,
follow the instructions on the screen to enter the
appropriate parameters on the menu.
Notes
1. Normally, ISA adapters do not use every
parameter. Most adapters require only a
port address.
2. The SVGA video controller in the server
requires specific memory and I/O address
assignments to function properly. To avoid
configuration conflicts, do not assign the
following SVGA memory and I/O addresses
to other adapters or options in the server:
Ÿ
Memory address space:
AðððH – C7FFH
Ÿ
I/O address spaces:
ð2Eðh – ð2EFh
ð3Bðh – ð3DFh
46E8h
10. After you type in all of the appropriate parameters,
press F10.
28
PC Server HMM