IBM 306m - eServer xSeries - 8849, Руководство по диагностике и обслуживанию

Страница: 61 / 144

2. Attach the drive-retention clip to the side of the drive.
3. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
4. Replace the cover (see “Installing the cover” on page 31).
5. Slide the server into the rack.
6. Connect the cables and power cords (see “Completing the installation” in the
Installation Guide or User’s Guide for cabling instructions).
7. Turn on all attached devices and the server.
Removing the operator information panel assembly
To remove the operator information panel assembly, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 27.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables necessary to replace the device.
3. Remove the server from the rack and remove the cover (see “Removing the
cover” on page 30).
4. Disconnect both cables from the operator information panel board.
5. Remove the screws that secure the operator information panel assembly to the
CD/DVD bay housing.
6. Lift the operator information panel assembly out of the server.
Chapter 4. Removing and replacing server components
45