IBM 16/4 Token-Ring, Руководство по установке

Страница: 5 / 34

1 Installing the IBM Token-Ring 16/4 PCI Adapter
Microsoft Windows 95 SR2.5
1 Installing the IBM Token-Ring 16/4 PCI Adapter
Microsoft Windows 95
SR2.5
Connecting to a
Windows NT 3.51 Server Requirements
• HP Vectra with Windows 95 SR2.5.
• IBM Token-Ring 16/4 PCI adapter and driver disk version 2.10.
• Driver File: IBMTRP.SYS, version 2.22
• Microsoft Windows 95 SR2.5 media.
• Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network
protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the IBM 16/4 Token-Ring PCI
adapter into a PCI slot.
2 Connect network cable media to the IBM 16/4 Token-Ring PCI adapter.
3 Power on the machine and start Windows 95SR2.5 and the Token Ring
card will be recognized as “PCI Token Ring Controller”. Insert the “IBM
PCI Token-Ring Adapter NDIS Drivers” and click on “Next”.
4 Verify that “IBM PCI Token-Ring Adapter” is listed and click on “Finish”.
5 Click on “OK” when the system prompts for the computer and workgroup
names.
6 Enter the Computer Name, Workgroup, and Computer Description in the
appropriate spaces and click on “Close” (Contact your network
administrator if you do not have the required information).
7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and
click “OK”.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 05 03 10
I/O Address 1400 D800 E400