IBM 16/4 Token-Ring, Руководство по установке

Страница: 31 / 34

13 Installing the IBM Token-Ring PCI Adapter
Microsoft Windows for Workgroups 3.11
13 Installing the IBM Token-Ring PCI Adapter
Microsoft Windows for
Workgroups 3.11
Connecting to a Novell
NetWare 4.11 Server Requirements
• HP Vectra with Windows for Workgroups 3.11
• IBM Token-Ring 16/4 PCI card and drivers disk version 2.10.
• Driver File: IBMTRPO.EXE, version 2.04
• Microsoft Windows for Workgroups 3.11 media.
• Novell NetWare 4.11 Server system that supports IPX network protocol.
• NetWare Client for DOS and MS Windows v1.21 installation media.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter
card into a PCI slot.
2 Connect network cable media to the IBM Token Ring card.
3 Update the “Dos” directory from Disk 2 and the “Novell\Dos” directory
from Disk 3 with the corresponding directories from the Odi_fix disk.
4 From the location of the “NetWare Client for DOS and Windows v1.21”
installation files, execute “Install.exe”.
5 Select option 5 “Select the driver for your network board” and press
“Enter”.
6 Select “OTHER DRIVERS”from the Network Board selection.
7 Insert the IBM Token Ring driver disk into the floppy drive.
8 Type the path “A:\NOVELL/DOS” when prompted and press “Enter”.
9 Select “IBM PCI Token-Ring Adapter” and hit “Enter”.
10 Accept the default network board settings and press “F10” to save it.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 09 03 10
I/O Address 1400 D800 E400