IBM 16/4 Token-Ring, Руководство по установке

Страница: 14 / 34

5 Installing the IBM Token-Ring 16/4 PCI Adapter
Connecting to a Windows NT 3.51 Server
9 Set the path to “A:\” in the dialog-box and click on “OK”.
10 Choose by highlighting the “IBM PCI Token-Ring Adapter Driver” and
click on “OK”.
11 With “IBM PCI Token-Ring Adapter Driver” listed in the “Network
Adapters” window, click on “Next”.
12 Select the applicable network protocols and click on ”Next” (Contact your
network administrator if you do not have the required information).
13 At the “Network Services:” prompt, accept default settings and click on
“Next”.
14 Click on “Next” to continue the network card installation.
15 Set the path to “D:\I386” (D:\ represents the CD-ROM drive with the
Windows NT4 Workstation CD) in the dialog box and click on “OK”.
16 Accept the default settings at the IBM PCI Token-Ring Adapter dialog-box
by clicking on “OK”.
17 At the “Show Bindings for:” prompt, accept the default settings and click
on “Next”.
18 Click on “Next” to start the network.
19 Specify your Computer Name, Workgroup or Domain (Contact your
network administrator if you do not have the required information) and
click on “Next”.
20 Click on “Finish” to complete the installation.
21 Select “Yes” at the prompt to shut down and restart your computer for the
new settings to take effect.
22 Install the Windows NT4 Service Pack 4 application to correct the error
messages in the Event Viewer.
23 Install the Hewlett-Packard Soft-Power Down application once the
Service Pack 4 has been installed.