IBIX 25, Руководство по эксплуатации и обслуживанию

Страница: 36 / 58

35
7 MAINTENANCE
Carefully read this section of the manual before carrying out machine maintenance and
adjustment operations; this will guarantee better safety conditions for the personnel in
charge of maintenance operations and more reliable results.
Please follow our recommendations below during each assembly and disassembly
phase.
For safety issues, please refer to chapter 1.
To ensure safe conditions during maintenance, remember that:
1.
Machine maintenance should be exclusively carried out by qualified, specially authorised
personnel.
2. Any operation should only be carried out after stopping the machine and disconnecting it
from the air compressor
.
3. Before restarting the machine, make sure that:
- all the replacement spare parts have been installed;
- any foreign objects (cloths, tools etc...) have been removed from the machine;
- all the protection systems have been correctly re-installed.
4. Before restarting the machine, make sure
that there aren’t any persons within the machine
work range
.
5. Do not use tools, cleaning equipment etc. while the machine is in operation.
6. Never place any body parts, limbs or fingers in any machine openings or hollow parts while
the machine is in operation.
7. Do not alter the machine frame in any way (by drilling holes in it, cutting it etc.) as this might
damage mechanical parts which would affect the whole structure.
8. The machine should be regularly inspected and maintained to keep its technical, operating
and safety conditions unaltered.
9. It is forbidden to carry out maintenance, cleaning and repairing operations on:
- a machine in operation;
- a machine not correctly positioned on the floor.
10. Before carrying out any maintenance, cleaning and repairing operation, remember to wear
the prescribed personal protection devices.
11. The protection and safety devices provided on the machine may only be removed for
working purposes (i.e. to carry out maintenance and/or adjustments).
12. If whoever is in charge of carrying out maintenance has doubts as to the correct procedure
to follow, even after reading the instructions contained in the manual, he or she should
contact the Manufacturer or an authorised After-sales centre to obtain the required
information.
BEFORE CARRYING OUT ANY MAINTENANCE, ALWAYS MAKE SURE THAT THE
ECOBLASTER IS UNPLUGGED FROM THE AIR SUPPLY SYSTEM AND DOES NOT STILL
CONTAIN COMPRESSED AIR IN ITS CIRCUITS.