manualshive.com logo in svg
background image

60

61

FRAME WARRANTY

  

7 Year Guarantee - Ibis Frames are guaranteed 
to be free of defects in materials and 
workmanship for a period of 7 years for the 
original owner. Ibis will either repair or replace 
at its discretion any part it determines to be 
defective. Paint and finish are covered for 
a period of 1 year. This warranty is non-
transferable and applies exclusively to Ibis 
bicycles manufactured after January 1, 2016.
Frames manufactured before January 1, 2016, 
will be covered by this warranty for a period of 
3 years for the original owner.
Paint and finish are covered for a period of 1 
year. Note that improper removal of protective 
tape is not covered under our paint warranty. 
Most protective tape manufacturers have 

recommended removal instructions to prevent 
paint damage. These usually involve, among 
other things, applying a little heat to soften the 
adhesive. Check with the manufacturer of the 
tape before attempting removal!

RIM WARRANTY

 

7 Year Guarantee - Ibis rims are covered from 
failure due to impact damage under normal 
riding circumstances for a period of 7 years. 
This warranty is non-transferable and applies 
exclusively to Ibis rims manufactured after 
January 1, 2016
Ibis branded hubs are guaranteed to be free 
of defects in materials and workmanship for a 
period of 2 years for the original owner.

NO FAULT REPLACEMENT

 

Should your Ibis product be involved in a crash 
or other non-warranty situation, Ibis Cycles 
will make replacement parts available at a 
minimum charge to the original owner for the 
life of the product. Ibis Cycles does this at its 
sole discretion and reserves the right to refuse 
this offer.

SMALL PRINT

 

The above limited warranties do not cover 
normal wear and tear, nor does it apply to 
damage that is the result of blatant abuse, 
neglect, improper assembly, improper 
maintenance, alteration, misuse, or heat 

damage (watch that exhaust pipe). The costs 
of disassembly, reassembly or repair of any 
attached components are not covered by this 
warranty and are the responsibility of the 
original owner. Under no circumstance are the 
costs of shipping to or from Ibis covered by 
these warranties.
Unless otherwise provided, the sole remedy 
under the above warranties, or any implied 
warranty, is limited to the replacement of 
defective parts with those of equal or greater 
value at the sole discretion of Ibis Cycles. In no 
event shall Ibis Cycles be held responsible for 
direct, incidental or consequential damages, 
including, without limitation, damages for 
personal injury, property damage, or economic 
losses, whether based on contract, warranty, 
negligence, product liability, or any other theory. 
Okay? Good!

WARRANTY REGISTRATION

 

Don’t forget to register your warranty online at:  

http://www.ibiscycles.com/support/warranty/ 
warranty_registration/

The Fox forks and shocks we use on our bikes are 
warrantied for one year. For USA Warranty Service:  

(800) FOX-SHOX / 369-7469

  

or 

[email protected]

For International Warranty Service 

Contact a Fox service center:  

http://www.ridefox.com/fox17/contact.php? 
r=worldwide&ref=service

PARTS

 

Find these online at the buy portion our website or get 
them directly from your Ibis dealer. Contact us or your 
dealer for more info. We recommend you always ride  
with one or two spare derailleur hangers.

SERIAL NUMBER

 

We recommend you write down your serial number for  
future reference. The serial number is located under the 
bottom bracket.

BIKE INFO

MODEL :

PAINT COLOR :

FRONT TRIANGLE SERIAL NO.

SWINGARM SERIAL NO.

FORK SETTINGS

PSI :

CLICKS REBOUND:

CLICKS COMPRESSION:

TUNING NOTES:

SHOCK SETTINGS

PSI :

CLICKS REBOUND:

CLICKS COMPRESSION:

TUNING NOTES:

Specifications and construction details given 
are not binding. We reserve the right to carry 
out modifications without prior notice. 

RIDE MORE, WORK LESS.

W

A

R

R

A

NT

Y / R

EG

IS

TR

AT

IO

N

W

A

R

R

A

NT

Y / R

EG

IS

TR

AT

IO

N

WARRANTY

WARRANTY / DOCUMENTATION

Содержание HAKKA MX






































Отзывы: