manualshive.com logo in svg
background image

42

43

DVO JADE X 

DVO worked with our National Enduro Team and 
our engineers to come up with a damping profile to 
match the new Ripmo and Ripmo AF kinematics. 

The Jade X features a 3 position compression 
adjuster that allows the rider to choose from 
full open (descending) mid position (single 
track or climbing) to near lock out for the 
3rd position. 
They also came up with a new rebound 
damping profile that has built in low speed 
rebound during the initial part of the 
suspension movement, keeping the bike 
feeling composed and balanced. The middle 
part of the rebound stroke (the sweet spot) 
allows for rapid movement which keeps 
the rear wheel tracking the ground without 
packing down and the end of stroke slows 
down again reducing the possibility of getting 
bucked during jumps or larger impacts.

REAR SHOCKS

The Topaz has a three position compression damping switch.  
As with all of our dw-link bikes, we prefer to run them WFO  
(wide open) and let the dw-link do its magic. 
For rebound, adjust to personal preference, as outlined on 

page 27.

DVO TOPAZ:
RIPMO / RIPMO AF

27.5% SAG / 14MM

RIDER WEIGHT

PRESSURE

LB

PSI

120-130

112-123

130-140

123-134

140-150

134-144

150-160

144-155

160-170

155-166

170-180

166-177

180-190

177-187

190-200

187-198

200-210

198-209

210-220

209-220

220-230

220-230

230-240

230-241

240-250

241-252

DVO JADE X :
RIPMO / RIPMO AF / HD5

COIL SPRING WEIGHT GUIDE

RIDER WEIGHT

SPRING WEIGHT

LB

LB

140-155

350

155-170

400

170-185

450

185-200

500

200-215

550

215-230

600

NOTE: Ripmo AF ships with the following  

standard coil springs

Small: 

350

Medium:

400

Large: 

450

X-large:

500

REAR SHOCKS

FOX DPS : RIPLEY

25% SAG - 

Shoot for .45” (~11mm) of sag.

RIDER WEIGHT

PRESSURE

LB

PSI

100

130

120

150

140

170

160

190

180

210

200

240

220

270

250

310

MAX 350 PSI!

FOX DPS : MOJO

25% SAG - 

Shoot for .47” (~12mm) of sag.

RIDER WEIGHT

PRESSURE

LB

PSI

100

120

120

140

140

160

160

200

180

200

200

230

220

260

250

300

MAX 350 PSI!

RI

D

E

REAR SHOCK AIR PRESSURE CHARTS :

 STARTING PRESSURES FOR SETTING SAG

Содержание HAKKA MX






































Отзывы: