ibidi Heating System 4 Slides – Silver Line
• Do not operate a damaged ibidi Heating System 4 Slides. If the housing seems damaged or
something is rattling inside the controller, contact the
for repair.
• Only operate the Heated Lid and Heated Plate properly installed on a microscope stage.
• Some accessible parts of the Heated Plate and Heated Lid can reach temperatures up to 55°C.
Avoid touching the temperature-controlled parts of the system when you have set the ibidi
Temperature Controller – Silver Line to high temperatures.
CAUTION
• Ensure that the external power supply is easily accessible. The ibidi Heating System 4 Slides
must be installed in a manner such that none of its components hinders access to the external
power supply.
• Immediately replace damaged cords, plugs, or cables to avoid risk of personal injury or damage
to the instrument.
• Only ibidi technical staff and technical staff instructed by ibidi are permitted to open and ser-
vice the ibidi Heating System 4 Slides.
• The external power supply should not be brought into contact with moisture. If the housing is
damaged, the external power supply should not be used.
• Avoid strong magnetic fields and sources of high frequency. The ibidi Heating System 4 Slides
might not function properly when located near a strong magnetic field or high frequency
source.
• Avoid vibrations from vacuum pumps, centrifuges, electric motors, processing equipment, and
machine tools.
• Avoid dust and corrosive gas. Do not install the ibidi Heating System 4 Slides where it could
be exposed to high levels of dust or to outside air or ventilation outlets.
• Install the ibidi Heating System 4 Slides in a location that enables easy access for maintenance.
• Do not place heavy objects on the instrument.
• Install the ibidi Temperature Controller – Silver Line in a horizontal and stable position, which
includes a table, bench, or desk upon which the instrument is installed.
• The heated glass plates of the incubation chamber can break on mechanical impact. If so, the
glass shards can lead to injuries if handled.
• Be aware that when switched on, a 10 V DC voltage is applied to the underside of the glass
on the Heated Lid. Do not touch the underside or put it in contact with anything conductive.
This could cause a short circuit that may damage the ibidi Temperature Controller – Silver Line
and/or the Heating Devices.
Version 1.0 (August 1, 2022)
10
Instruction Manual
