ibidi Heating System 4 Slides – Silver Line
All electrical connectors are located on the back of the Temperature Controller (Figure
). For con-
necting the heating devices, two sizes of ports are available. The larger ports 1/2 and 4/5, which each
accommodate two output channels, and the smaller ports for the output channels 3 and 6. Please find
which heating units can be connected to which port in Table
(Section
). Refer to Section
for
setting up the ibidi Heating System 4 Slides.
USB
Power
supply
External
temperature
sensor
On/Off switch
Type:
Serial number:
Production date:
ibidi Temperature Controller
ibiTC3-001
11/2021
ibidi GmbH
Am Klopferspitz 19
D-82152 Martinsried
Germany
+49(0)89520 46 17 0
www.ibidi.com
Temp
Sensor
Power
Signal
Out
1 / 2
3
6
4 / 5
Output Channels
24 V
max. 6.7 A
USB
Electrical cable
to Gas Mixer
Ports to
heating devices
On
Off
Figure 6: Rear view of the ibidi Temperature Controller – Silver Line.
4.4
Heated Plate and Magnetic Holder
The Heated Plate provides the base for the ibidi Heating System 4 Slides. It fits into any microscope
stage with a mounting frame for multiwell plates. The Heated Plate offers four cavities to mount µ-
Slides for parallel observation on the microscope. To prevent shifting of the samples, put the magnetic
holder on top of the µ-Slides.
A
B
Figure 7: Heated Plate for 4 µ-Slides (lower part) and magnetic holder (upper part) (A) and assembled
(B).
Instruction Manual
19
Version 1.0 (August 1, 2022)
