Operation with timer,
no “GEL SAVER “ mode
1. Timer selection
• Press ON/OFF switch located in the timer area
(#12)
.
• The LED TIMER
(#13)
lights, showing that timer mode is selected.
•
Press the Gel saver switch (#16) until the LED (#17) turns off.
• Press clear switch
(#14)
to cancel the previous elapsed time.
• Press SET/OUT switch
(#1)
to select the SET mode.
• Press the time switch
(#15)
until the timer LED
(#13)
blinks.
• Use switches
(#8)
to select the desired separation time.
When the preset time is elapsed, the unit automatically stops.
Simultaneously:
The message “end” appears on the left display.
The same preset and elapsed time appear and the right display
(#3)
.
The STOP LED
(#11)
is lit.
• Press STOP
(#9)
to cease the alarm.
• Press CLEAR
(#14)
to cancel the elapsed time.
• The unit is then ready for another run.
2. Other settings
• Follow the same instructions described on previous page.
23
