MOTION SERIES BY IBF
IRON BODY FITNESS™
6
A
SSEMBLY
I
NSTRUCTIONS
S
TEP2
–
Front Support Bar
#2 Carriage
Bolt x 2
#7 Cap Nut
x 2
#8 Curved
Washer x 2
Attach the Front Support Bar.
Align the holes on the front of the
Main Frame with the holes on the
Front Support Bar. Be sure that the
display holder is pointing away from
the Main Frame. Starting with the
hole on the support bar, thread a
carriage bolt through each hole and
through the hole on the Main
Frame. Ensure the square base of
the carriage bolt is inserted in the
square hole on the support bar.
Thread the Curved Washer onto the
bolt and top with the Cap Nut.
Tighten with a wrench.
For best stability ensure the flat part of
the support treading are positioned
against the ground.
