iBell OS23-46, Руководство оператора

Страница: 7 / 16

6

Do not force the tool to do other jobs, other than its intended
one.
Operations for which the tool is not designed, including
modification of the machine, may cause machine damage, personal
injuries, and invalidate the warranty.

Use of personal protective equipment is recommended to
reduce the risk of personal injuries
. Use Safety goggles with side
shields, Ear protection such as plugs or muffs, Face mask or dust
mask to fight the debris produced by operation, Heavy-duty work
gloves to protect your hands and Safety non-slip work boots.

Keep bystanders and all other living creatures, away from the
work area.
Do not operate the tool in the presence of flammable
liquids or gases. Do not operate the tool in wet or damp conditions.

Always hold your tool firmly with both hands to maintain
control and to avoid kickback.
Never place your hand near the
rotating accessory. The operator can control torque reactions or
kickback forces, if proper precautions are taken. Do not position
your body in the area where power tool moves.

In an event of danger, immediately remove the power plug from
the socket and inspect it only by a qualified technician.

The rated speed of the accessory (rotating) must be at least equal
to the maximum speed of the tool
. Do not use pads that have a
working speed less than 12,000 rpm no-load. Accessories
running faster than their rated speed can break and fly apart.

The outside diameter and the thickness of your accessory must
be within the capacity rating of your power tool.
Incorrectly
sized accessories cannot be adequately guarded or controlled .

Keep the work area well ventilated. Ensure that the workplace
lighting is adequate, and/or provide extra lighting for the
immediate work area.
ORBITAL SANDER SAFETY WARNINGS
WARNING!
Misuse or failure to follow the safety rules stated in
this operator’s manual may cause serious personal injury.
IBL OS23-46