23
Suspected malfunctions are often due to causes that the users can
fix themselves, therefore check the product using this section. In
most cases the problem can be solved quickly.
Problem
Possible Cause
Solution
1. Product does
not start
1.1 Battery discharged
1.2 Battery damaged
1.3 Other electrical
defect to the
product
1.1 Charge battery
1.2 Check by an
electrician
1.3 Check by an
electrician
2. Product does
not reach full
power
2.1 Battery capacity too
low
2.1 Charge battery
3. Unsatisfactory
result
3.1 Driver bit is worn
3.2 Driver bit not
suitable for
intended operation
3.1 Replace with a new
one
3.2 Use suitable driver
bit
4.
Product
suddenly
stops
4.1 Product overloaded
4.2 Battery pack
discharged
4.3 Battery too hot
4.1 Remove the
product from
the work-piece and
switch it on again
4.2 Remove and charge
battery pack
4.3 Remove battery
pack and let it cool
down
TROUBLESHOOTING
WARNING!
Only perform the steps described within these
instructions! All further inspection, maintenance and repair work must
be performed by an authorised service centre or a similarly qualified
specialist if you cannot solve the problem yourself!
IBL BM18-60
