21
Set the mode adjustment ring to screw driving mode. Adjust the
torque setting according to the screw size and work-piece
material.
Pre-drill the holes with a smaller diameter of the screw to be
screwed.
Hold the product perpendicular to the screw to be screwed in or
out. Holding it at an angle may cause slipping or jamming of the
driver bit.
Place the tip of the driver bit directly on the screw first and then
switch the product on.
Only apply as much pressure as necessary to keep the screw in
place and the driver bit in contact with the screw head. Too much
pressure will cause damage to the screw head and driver bit; too
little pressure will cause the driver bit to slide away.
Remove blocked and stuck screws by changing the rotational
direction.
SCREW DRIVING
OTHER OPERATIONS
The tool can also be used as a hammer drill, to pulverize holes in
brick and other similar materials
(light masonry works only).
As well as can be used to loosen jammed screws, nuts, bolts etc.,
with suitable accessories.
With the help of the Operation mode
adjustment ring (13), these operations can be carried.
IBL BM18-60
