19
Torque
Description
1 - 4
For driving small screws
5 - 9
For driving screws into soft material
10 - 14 For driving screws into soft and hard material
15 - 20 For driving screws into hard wood
For drilling in wood, plastic and steel
For light hammer drilling
TORQUE ADJUSTMENT
It is possible to adjust the output torque to each of the twenty
settings.
The torque is adjusted by rotating the torque adjustment
ring (3). Torque is greater when the torque adjustment ring is set
on a higher setting and lower when set on a lower setting.
AUTOMATIC WORK LIGHT
1
The work light (1) will automatically
illuminate by pressing the ON/OFF switch (6).
This helps to focus on the work more
thoroughly and could work on a not much
bright environment as well.
IBL BM18-60
