18
The two-speed gear control (4) is used to switch between two
working modes. When the gear is set to position ‘
1
’, the speed will
decrease and the drill will have greater power and torque. When the
gear is set to position ‘
2
’, the speed will increase and the drill will
have less power and torque.
Gear
position
Description
1
Low speed range for screw-driving or working with large
drilling diameter
2
High speed range for working with small drilling
diameter.
WARNING!
Only change the rotational direction when the product
is switched off and has come to a complete stop! Always ensure that the
forward/reverse rotation control is adjusted to the correct position
depending on the intended operation! Always push the forward/reverse
rotation control as far as it will go! Do not use the product with the
control switch in any other intermediate position!
TWO-SPEED GEAR CONTROL
IBL BM18-60
4
